Article: Sno-Way 29THD Series Snow Plow

The Sno-Way 29THD series snow plow was designed for 3/4 Ton trucks like the Ford F-250,
dodge Ram 2500, GMC 2500 Sierra and the Chevrolet 2500 Silverado. It is also a great snow for the
1 Ton trucks like the Ford F-350, Dodge Ram 3500, GMC 3500 Sierra and the Chevrolet 3500 Silverado.

The Sno-Way® 29THD is a Trip Edge snow plow built for the extreme winter conditions that we
have here in Buffalo NY. This snow plow comes in two widths, 7’6” and 8’0”. Both widths are 29” tall.

The custom designed 6” trip edge is supported with four fully adjustable compression springs that are
tuned to trip only when required to.

Sno-Way 29THD Series Snow Plow


Sno-Way has also engineered into this design their patented Shock Killer system that minimizes violent shocks to the plow, truck and driver.

With the Optional Sno-way Down Pressure® Hydraulic System coming as standard equipment, this snow plow will clean better and cut 30% off
of your plowing time. The Down Pressure Hydraulics adds more than 250 lbs of down force to the cutting edge, an industry first. With the Down Pressure® Hydraulic System the plow scrapes clean forward and maximizes back dragging. More Options >>

A snow removal contractor needs to not only perform well, buts needs to look good while doing it. Sno-Way has this covered for you with the
first ever Triple-Coat Protection System: zinc phosphate wash, automotive E-Coat primer and military grade powder coat combination.

The finish of the Sno-Way Triple-Coat Protection System is resistant to salt, sand, stones or any other aggregate material. With a Sno-Way® 29THD
Plow you will always look and perform your best.

Greater dependability is accomplished through the patented EIS (Electrical Interruption System). The EIS eliminates the need for troublesome
relays. The elimination of relays by creating a closed-loop truck to plow light connection makes this Sno-Way plow a much more dependable plow.



Sno-Way pays close attention to even the smallest details so that operators can maximize performance and efficiency. With a tube steel
tab-slot and lock construction ensures component fit and precision welding while the pre-drilled top rail allows the contractor to easily add the
E-Z Fit Deflector in less than 60 seconds. This patented Sno-Way E-Z Fit Deflector keeps snow from flying into the windshield on even the most
extreme plowing nights.  Other Features >>

Sno-Way's 29THD Trip Edge Plow has been engineered to fit a wide range of work trucks using time-tested blade geometry made from high
strength steels. A Sno-Way 29THD snow plow fits more, scrapes more, plows more, and trips less.

Match this plow with the optional Sno-Way Pro-Control II for wired or wireless plow control. The Sno-Way Pro-Control II provides the plow
operator with three Macro controls giving the skilled operator a memory function that can be set for any repeated operations.

The Sno-Way® 29THD Series as well as the entire Sno-Way line of truck snow plows and salt spreaders are available at the Bison
Fleet Complex located at: 1615 William St • Buffalo, NY • 14206 • Phone: (716) 894-5799

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Copyright BisonSnowPlows.com. All rights reserved. Duplication of any content or images without express written permission protected under copyright law. TOS