Article: Sno-Way 29VHD Series Snow Plow

The Sno-Way® 29VHD series snow plow is the top of the line in Vee Plow technology designed to fit
¾ ton to Class 5 trucks. Sno-Way patented MaxADJUST™ Leveling System is a single adjusting arm
blade leveling system that enhances the cleaning ability of the plow.

This MaxADJUST™ Leveling System permits the plow operator to adjust the center hinge for perfect
plowing alignment and eliminate the snow trail that other v-plows leave behind. The exceptional
ground hugging blade design keeps the plow on the pavement cleaning more ice and snow, saving
you time.

Double acting wing cylinders have been designed to produce maximum force in both the forward or
back hydraulic position. These improved cylinders keep the plow wings from being forced open in


Sno-Way 29 VHD Series Snow Plow

heavy snow conditions and allow for improved vee-plow back dragging in the tightest spaces.
Read More >>

The Sno-Way Down Pressure® Hydraulic System comes as standard equipment making this plow clean better cutting your plowing time by 30%.
Sno-Way’s Down Pressure® Hydraulic System applies over 250 pounds of down force on the cutting edge, an industry first and scrapes clean
forward and maximizes back dragging.



The Sno-Way 29VHD V-Plow is a trip plow and while other V type trip plows have a difficult time with obstacle tripping, the Sno-Way 29VHD V-
Plow handles obstructions with ease. This is due to the patented Sno-Way Shock Killer™ Trip Return System. The Shock Killer™ reduces blade
return shock to the truck and the driver.

At Sno-Way no detail is too small in the pursuit of efficiency and maximum performance. The tube steel tab-slot and lock construction guarantees
components fit and precision welding while the pre-drilled top rail allows the contractor to easily add the Sno-Way E-Z Fit Deflector in less than
60 seconds.  Other Accessories >>

In addition to all of this Sno-Way engineered a system that allows large contractors to add the optional E-Z Switch™ Wings to increase the load
moving capacity of the Sno-Way’s 29VHD V-Plow. This accessory wing system requires no drilling and will not interfere with the structural
integrity of the plow blade.

The EIS™ – Energy Interruption System is a standard plug and play electrical system on this snow plow providing down-time reduction and limiting
corrosion.

The finish of the Sno-Way Triple-Coat Protection System is resistant to salt, sand, stones or any other aggregate material.
With a Sno-Way 29VHD V-Plow you will look as well as perform at your best.

Match this plow with the optional Sno-Way Pro-Control II for wired or wireless control. The Sno-Way Pro-Control II provides the plow operator
with three Macro controls giving the skilled operator a memory function that can be set for any repeated operations.
Other Options >>

The Sno-Way 29VHD V-Plow as well as the entire Sno-Way line of truck snow plows and salt spreaders are available at the Bison
Fleet Complex located at: 1615 William St • Buffalo, NY • 14206 • Phone: (716) 894-5799

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Copyright BisonSnowPlows.com. All rights reserved. Duplication of any content or images without express written permission protected under copyright law. TOS