SALTDOGG® 2.5 Cubic Yard Gas Stainless Salt|Sand Spreader
SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader
ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand mix.

Available now at Bison Snow Plows (716) 894-5799.

 

  

SALTDOGG™ 2.5 CUBIC YARD GAS STAINLESS HOPPER SPREADER

SALTDOGG™ 2.5 CUBIC YARD GAS STAINLESS HOPPER SPREADER


• Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight).

• 120 in. hopper with a capacity of 2.5 cubic yards.

• 10-1/2 HP gas engine with convenient electric start and throttle control.

• Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.

• In-cab controls with independent variable speeds for the conveyor and spinner.

• 12 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.

• Versatile 12 in. chain conveyor drive.

• High quality, 304 stainless steel construction for optimum corrosion resistance.

• Stainless steel inverted V improves flow and reduces stress on the drive line.

• Top screen included.

• Optional extended chute available.

• Made in the USA.



SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt,
bulk sand, or a 50/50 salt/sand mix. Its 10 ft hopper fits an extended bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the
power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch
and throttle.

A SaltDogg stainless spreader is an investment made to last. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with
a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio
with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up. Its hopper, which comes outfitted with a
top screen and fully welded frame, is made from high quality 304 stainless steel for long lasting corrosion protection. The spreader is equipped with a
steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor
is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.

It's 12 in. poly spinner casts material 2 ft to 30 ft and gets the job done. The spreader is available with a regular or extended chute. Adjustable baffles
allow you to adjust the spread pattern to match your use.

The SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.

Product Common Use: Residential & Commercial Spreading, Property Maintenance, Parking Lots, Driveways



 

PART NUMBER & DESCRIPTION

Capacity

Feed Mechanism

Specs

1400300SS
SaltDogg™ 2.5 Cubic Yard Gas Stainless Steel Hopper Spreader

2.5 Cu. Yd

Conveyor Chain

  1400350SS
SaltDogg™ 2.5 Cubic Yard Gas Stainless Steel Hopper Spreader-Extended Chute

2.5 Cu. Yd

Conveyor Chain
  OTHER INFORMATION
  Manual Instructions: 3008005_C.pdf


 

Copyright BisonSnowPlows.com. All rights reserved. Duplication of any content or images without express written permission protected under copyright law. TOS