Authorized SnowDogg® TE80 II Trip Edge Snow Plow Dealer in Buffalo NY
 For commercial users and contractors in Buffalo NY that prefer trip edge snow plows, the TE80 II Straight Blade Trip Edge
Snow Plow features the durability and reliability of the EX-II series. Rough roads and uneven, hidden
obstacles, bumps, and cracks are no match for the the SnowDogg TE80 II.



• Simplicity and reliability of flagship EX series in a trip edge design.

• Corrosion-resistant 304 stainless steel moldboard with 1/2 in. cutting edge

• Get an even scrape and even edge wear with the tubular steel Floating A-Frame™

• Enjoy 20% more ground clearance than previous TE models.

• Mount and dismount reliably and quickly with the all new QuickMount II™.

• Stack high, and lift fast with a municipal-style single chain lift arm.

• Fleet interchangeability with all prior HD, EX, TE, CM, and XP plows.

• Clear with speed and agility using the 70º attack angle and 1-1/2 inch angle cylinders.

• Fully enclosed 2 HP power/hydraulic unit with full size SAE standard cartridge valves, 3/8 in. rubber hoses, and integral valve manifold, or opt to use your truck’s 
   central hydraulics.

• Cut through the dark with powerful dual-beam halogen plow lights with secure double post mounts.

• Ergonomic, backlit control is easy to use with gloves on.

• Get the value you deserve with standard shock kit, cast shoes, snow deflector, and blade guides.

SnowDogg TE80 II: Rough roads and uneven, hidden obstacles, bumps, and cracks are no match for the the SnowDogg TE80 II. For commercial users and contractor that prefer trip edge operation, the TE80 II features the durability and reliability of the flagship EX-II series, in an innovative trip edge design.

Floating A-Frame™
The new tubular steel Floating A-Frame features a sliding-pin connection. This makes the snow plow less sensitive to mount height, and easy to align. The sliding-pin connection lets The snow plow contour the road for a clean clear, and helps avoid uneven edge wear. Not to mention, the design increases ground clearance 20% over previous models.

QuickMount II™
No need for a plow jack with the QuickMount II. The snow plow's integrated swing-down feet are independently actuated and height adjustable, for easy mounting and dismounting even on rugged terrain. With the QuickMount II just drive into position, push on SnowDogg light bar, attach the electrical and safety pins, and kick up the stands.

TE80 II features a signature 304 stainless steel SnowDogg moldboard with eight 1/4 in. laser-cut steel ribs. A full-length 2 in. cross tube helps spread the load across the entire plow in order to protect vital connection points. An aggressive 70° attack angle thrashes through snow and ice with excellent scraping, rolling, and throwing action. A 1/2 in. cutting edge helps save the blade from wear and tear. Steel components are primed and powder-coated on site to provide maximum process control and the highest quality.

Trip Action, Lift and Angling Cylinders
Two pairs of stress-optimized trip springs allow the independent edge to give and pass over unseen obstacles and ruts. The trip edge design maximizes The snow plow's effectiveness and helps you avoid having to "clean up" after a trip. The new municipal style lift arm, chain, and cylinder allow for higher lift at a faster pace, and easy adjustments. The snow plow's oversize angle cylinders produce powerful, fast, and agile angling.

The Full Package
Buyers Products continues to raise the industry bar for quality and value. The fully enclosed 2HP, DC-powered hydraulic unit comes equipped with SAE standard cartridge valves and hefty 3/8 in. rubber hoses. A “gloves-on” in-cab backlit controller, poly snow deflector, cast plow shoes, and dual-beam halogen plow lights come standard on the TE80 II. Plus, there is complete fleet interchangeability and backwards compatibility with all other HD, EX, TE, CM, and XP Series plows.

Product Common Use: 3/4 Ton Trucks with Plow Prep, 1 Ton Trucks (and up), Medium Duty Trucks (Ford® Super Duty®/Chevy® HD/GM® HD)

Plow Type Straight Blade Electrical Headlamp Rated Replaceable Micro-ISO Relays

Moldboard Material 304 Stainless Steel Harnesses Separate Light and Hydraulic 4GA Power Wires

Moldboard Thickness 12 Ga Trip Springs 4

Blade Width 96" Angle Cylinders 1 1/2 x 12  "

Angled Blade Width 83.0 " Lift Cylinder 2 x 6 "

Blade Height 31 " Mounting System QuickMount II™

Ribs 8 Stand Independent Swing Down Feet

Cutting Edge 1/2 x 6 " Min Order Qty 1

Plow Shoes Standard Multiple Sale Qty 1

Snow Deflector Contoured Poly Product Code 920

Lights Dual Halogen Bulbs Sell Pack Type Unit

    Shipping Weight 422.000


Copyright All rights reserved. Duplication of any content or images without express written permission protected under copyright law. TOS